Vessel Name: OFF COURSE (Name Reserved)
Builder: WINTER CUSTOM YACHTS
Model: 37 Custom Carolina
Model Year: 2018
Year Built: 2018
Category: Boats
Country: United States
MLS #: 405805
Staterooms: 1
Length: 37 (11.28m)
Draft: 2' 3" (0.69m)
Beam: 11' 8" (3.56m)
Water Capacity: 50 Gal
Manufacturer: Mercury
Model: Verado
Engine Type: Outboard
Fuel Type: Gas/Petrol
Horsepower: 350
Manufacturer: Mercury
Model: Verado
Engine Type: Outboard
Fuel Type: Gas/Petrol
Horsepower: 350
Manufacturer: Mercury
Model: Verado
Engine Type: Outboard
Fuel Type: Gas/Petrol
Horsepower: 350
The 2018 37’ Winter Custom Yachts, known as W 26 by the factory, is one of the most beautiful center console vessels in the world. Her proven North Carolina hull form provides a smooth, dry ride and is propelled by triple Mercury Verado 350s. A SeaKeeper 3 keeps this fishing platform steady. Although she’s designed as a tournament winner, she’s also a head-turning cocktail cruiser. A custom tow eye is accompanied by a solar panel and tracking device when she’s pulled behind a yacht. Contact us to schedule time to see this work of art.
Key Features
- Pedigree sea-keeping design and build quality by Winter Custom Yachts
- SeaKeeper 3 stabilization
- Triple Mercury Verado 350s
- Fish-ready
- Tow-ready
- Although lift-kept, new bottom paint and waterline-up polish (March 2024)
- Upgraded steering pumps
- All bilges, engine room and equipment faired and painted with Alexseal Cloud White
- Walkaround construction
- Layer 1” Diab A500 foam on cabin
- Layer 1808 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy
- Centerline helm with helm pod
- Glove box with USB charging outlets
- (4) Molded in drink holders
- (2) Simrad NSO 19" touchscreen displays
- Simrad OP50 controller
- Simrad Open-Array radar
- Simrad NAC-2 autopilot
- Ritchie 6" Super sport compass mount
- Navico 3D Structural scan with forward scan transducer
- Wave Marine WIFI module
- Simrad VHF
- NAIS 500 NAIS signal module
- ACR spotlight controller
- FLIR MD625 fixed thermal imaging camera
- Fusion MS-NRX300 with JL Audio speakers and amps
- 20” Rigid Spot style LED light bar
- Mercury Smartcraft gauges
- Drink holders in console at helm
- Glove box with USB charging outlet
- C Zone display to control systems
- Molded footrest
- Release Marine chairs with flip up bolsters
- Barro ultra leather fabric
- Molded in curtain track on console
- Triple Mercury Verado 350 HP Outboards with up-to-date service
- Mercury gauges and controls
- Mercury power steering recently changed with upgraded pumps
- Mercury fuel filters
- Side Power SE 80 12 VDC Bow Thruster
- SeaKeeper 3 gyro stabilizer
- Jabsco saltwater pump
- Jabsco Blaster freshwater pump
- (4) 1500 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch
- (2) 2000 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch
- Rule sump boxes
- FRP discharges on hull sides
- Dometic freshwater flush head with 15 gallon holding tank
- Livorsi 1150 high speed trim tabs
- New batteries
- 525 gallon fuel capacity in cockpit
- 50 gallon fresh water tank
- 15 gallon hot water heater
- (2) Newmar 60-amp battery charger 12-volt, (3) bank
- C-Zone control system on all DC systems
- Custom Paneltronics panels
- 120-volt AC, 24-volt DC
- 30-amp, 240-volt AC service
- 12-volt DC lighting throughout
- All wiring guided by ABYC standards
- (2) 803 TIX Lumishore underwater lights in transom
- Forward bow seating with storage within
- (6) 15-degree rod holders in bow cap
- (4) 8” pull up cleats on top deck
- Faux teak toe rail with chafe gear
- Custom removable bow pulpit and gear
- RC-5 low profile windlass
- MaxSet 8 polished SS plow anchor
- Genuine teak decking
- Radiused gunnel faces
- Dive tank storage under love seat
- (2) Fuel fills on side gunnels
- Water fill on side gunnels
- Waste access on gunnels
- Full pass-through side door with gate
- Palm Beach Towers hard top
- Custom molded hardtop with polished aluminum frame T-top style
- Upgraded hardtop to incorporate thicker 3” hardtop
- Radar Pod
- Molded aft single 12-volt LED Lumitec spreader light with molded pod
- Molded forward single 12-volt LED Lumitec spreader light with molded pod
- Molded navigation lights
- Recessed dome lights 12-volt, tri-color
- (6) Rod holders welded to aft side of hardtop
- Anchor light on mast
- Molded in “Pancake” Birdsall Marine teaser reels
- 20” Rigid Spot style LED light bar
- Rupp Revolution Top Gun outrigger bases
- Rupp HD carbon fiber poles 18’
- Rupp HD carbon fiber center rigger
- One piece acrylic curtain enclosure
- (6) 30 degree rod holders in cockpit
- (2) Hawse pipes on covering board top
- (2) 10” cleats mounted on side wall I cockpit
- Custom baitwell in transom
- Baitwells to feature laminated curved glass
- Genuine teak decking
- 26” freeboard from transom to bow
- Full pass-through transom door with gate
- Under gunnel accent lighting throughout
- Release Marine triple seat with flip-up bolster
- Concealed access to shore power and water spigots under gunnels
- (2) In-deck fish box (16” W x 14” D x 60” L)
- Dive ladder on transom
- Access to lazarette and gyro compartment
- Integrated solar panel charging system with monitoring capability
- WIFI network extender for connection to C-Zone up to 350’
- Custom SS towing eye
- Teak stair treads
- Quarter sawn teak interior
- Teak and maple flooring
- Cabinetry throughout interior with satin finish
- White painted surfaces
- Solid teak countertops
- Solid surface countertops with stainless steel undermount sink
- Jabsco freshwater flush head
- Satin Southco Mobella McCoy door handles
- Satin Southco push button latches
- Recessed Imtra Ventura LED lights with white bezel in overhead
- Access to all electronics and AC panel
- Oversized bilge pumps
- Warning beacon light on top of tower to indicate bilge pump operation
- A buildup of Alexseal fairing products followed by Alexseal primer to a finished surface
- Topsides: Alexseal Cloud White
- Hull: Alexseal Stars and Stripes
- Boot Stripe: Alexseal Cloud White
- Bottom Paint: SeaHawk Cukote Black
- 1” solid stainless steel bumper metal
- (2) Layers ½” marine grade Okoume plywood
- Layer 1708 Vectorply biaxial fiberglass outside bottom impregnated with Pro Set Epoxy
- Layers 1708 Vectorply biaxial fiberglass on keel and chine
- Layers 1708 Vectorply biaxial fiberglass inside bottom up through hull side
- Laminated Douglas Fir stringers
- Hull side 2 layers 6mm Okoume plywood Loyds type 1088
- Layer 1708 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy
- Laminated Douglas Fir rib bands
- Laminated Douglas Fir chine
- Laminated Douglas Fir sheer clamp
