Beautiful classic vintage boat from 1975 rigged in Kecth, 46 feet (14.26 m), unique model born in the Stizi-Toulon-France shipyards, model Altair, designed and engineered by a Naval Engineer from shipyard itself.
Ocean-going boat built in mahogany planking crossed on oak frames with three layers of epoxy on the sides.
Charming and romantic like a French bistro, internally we find original and intact materials such as mahogany, cork and copper.
She is a reliable boat that has already crossed the ocean and the entire Mediterranean several times in total safety due to her structural and technical characteristics.
Very comfortable boat with a nice livable square both in terms of height and width (DINETTE) with kitchenette.
She is also very comfortable when sailing thanks to the not too high ratio between displacement and ballast and her generous width.
Boat in perfect order ready to sail as can be seen from the NAVAL SURVEY realized in June 2022.
Vessel Name: Kalypso
Builder: CUSTOM KETCH
Model: Altair
Model Year: 1975
Year Built: 1975
Category: Cruising Sailboat
Country: Italy
MLS #: 406384
Staterooms: 3
Length: 14.26 (14.26m)
Draft: 8' (2.42m)
Beam: 13' 4" (4.05m)
Water Capacity: 132.09 Gal
Manufacturer: Perkins
Beautiful classic vintage boat from 1975 rigged in Kecth, 46 feet (14.26 m), unique model born in the Stizi-Toulon-France shipyards, model Altair, designed and engineered by a Naval Engineer from shipyard itself.
Ocean-going boat built in mahogany planking crossed on oak frames with three layers of epoxy on the sides.
Charming and romantic like a French bistro, internally we find original and intact materials such as mahogany, cork and copper.
She is a reliable boat that has already crossed the ocean and the entire Mediterranean several times in total safety due to her structural and technical characteristics.
Very comfortable boat with a nice livable square both in terms of height and width (DINETTE) with kitchenette.
She is also very comfortable when sailing thanks to the not too high ratio between displacement and ballast and her generous width.
Boat in perfect order ready to sail as can be seen from the NAVAL SURVEY realized in June 2022.
The deck entirely in teak was redone in 2015, electrical system in 2013.
Complete refitting of the teak deck in 2021 with internal and external painting.
Hauling and hull: 2021.
Total overhaul of the 74 HP 4-cylinder Perkins engine in May 2021, plus annual routine maintenance 2023.
New outboard motor related to tender.
New cushions.
Rocna anchor 2022
- 2 double cabins including one owner's cabin forward and one aft;
- n.1 toilet located amidships;large shower plus external shower, fridge and icebox.
- n.1 kitchen equipped with fridge and freezer, hob, sink with mixer unit, worktop, wall units and furniture for storing the galley, supplies and crockery;
- Sitting room with dinette table with bench/berth arranged in opposition and on the port side;
- The furniture is made of cabinetmaking with a glossy finish in good condition and of classic taste, the cauldrons are made of teak wood.
- The coverings below deck and cabins are in a good state of conservation and are made of light-coloured panels accompanied by lighting spotlights.
- aft gangway in teak and stainless steel;
- aft platform covered in teak;
- bathroom ladder, hot and cold external shower (aft and bow);
- electric refrigerator;
- Boiler 220v;
- Galley hob;
- n.2 Vhf (Dantronik RT5100 + Scobra);
- Depth sounder (Tridata Raymarine);
- GPS Clipper;
- Compass;
- Stereo;
- Self-inflating raft;
- complete engine instrumentation;
- Sprayhood ;
- awnings;
- genoa + mainsail + mizzen + pole + spy;
- Walder type boom restraint system;
- Rectifier,
- battery charger;
- Sterling Power Pro Charge D voltage regulator 24V 25A;
- 220 cm service tender equipped with 2.3 horsepower Honda outboard engine;
- external table for the cockpit (foldable).
