Vessel Name: 2024 Selene 72 Ocean Explorer
Builder: SELENE YACHTS
Model: 72 Ocean Explorer
Model Year: 2024
Year Built: 2024
Category: Trawler Yacht
Country: New Zealand
MLS #: 413832
Heads: 5
Staterooms: 6
Length: 23.11 (23.11m)
Draft: 6' 3" (1.9m)
Beam: 19' 5" (5.92m)
Cruise Speed: 9 Knots
Max Speed: 11.5 Knots
Water Capacity: 599.93 Gal
Holding Tank: 199.98 Gal
Manufacturer: Cummins
Model: QSL9
Engine Type: Inboard
Fuel Type: Diesel
Horsepower: 405
Manufacturer: Cummins
Model: QSL9
Engine Type: Inboard
Fuel Type: Diesel
Horsepower: 405
The Selene 72 yacht, a product of a collaboration between Howard Chen and James Fwu, represents a combination of modern styling and the enduring qualities of a classic ocean-going vessel. Here are the key features and details of the Selene 72:
- Design Collaboration: Howard Chen worked with Guido de Groot, a renowned Dutch designer, to create yachts that maintain the core qualities of Selene’s classic ocean yachts while incorporating softer lines and different interior decorations that appeal to European owners.
- Naval Architect Expertise: James Fwu of JFNA, a notable naval architect from Taiwan, joined the international design team. He contributed to various aspects of the yacht’s design, including hull lines, hydrostatics data, structural design, stability calculations, dynamics performance, and obtaining the “EU Type Examination Certificate” with RINA.
- Specifications: The Selene 72 has a Length Overall (LOA) of 75 feet and 9 inches, with a displacement of 158,688 pounds (72 tons). Two Cummins QSL9 405 BHP engines power it, although a single-engine version is also available.
- Fuel Capacity: The yacht has a substantial fuel capacity, carrying more than 3,000 US gallons (approximately 11,355 litres) of fuel. This allows for long-range voyages at a cruising speed of 9 knots, with a top speed of 11.5 knots.
- Elegant Design: The most striking aspect of the Selene 72 is its elegant combination of modern styling and the traditional design elements of a reliable ocean-going vessel.
- Distinctive Features:
- Raised Pilothouse: The yacht features a powerful raised pilothouse, offering excellent navigation and control visibility.
- Portuguese Bridge: The Portuguese bridge is a characteristic feature that enhances onboard safety and convenience.
- Wide Upper Deck: The expansive upper deck provides additional space for various activities and relaxation.
- Side-Deck Walk-Arounds: The side-deck walk-arounds ensure easy and safe passage for passengers of all ages. A wide-body or semi-wide-body design is also an option, catering to different preferences.
- Innovative Elements: The yacht introduces some new design elements, such as large side windows in the hull, which enhance the interior’s luminosity and offer beautiful views of the surroundings. Additionally, the flying bridge features curvy and sleek lines, adding a modern touch to the vessel’s aesthetics.
In summary, the Selene 72 yacht is a product of international collaboration, blending classic ocean yacht features with modern design elements. It offers a combination of elegance, safety, and convenience, making it an attractive option for those seeking a luxurious and seaworthy vessel for long-range voyages.
GENERAL CONSTRUCTION
Hull lamination:
The hull lamination schedule is per the construction plan. The area below the water line will use “Isophthalic” Gelcoat and vinyl ester resin for the first three (3) layers. The deck lamination schedule is per the construction plan. Construction plans for the structure will be based on standards set by the AMERICAN BUREAU OF SHIPPING (ABS).
FRP Details:
- Hand-laid Cymax bi-axis and uni-direction stitched woven roving/mat
- Vacuum resin infusion hull and superstructure
- Four watertight bulkheads (chain locker, collision locker, forward E/R, Aft E/R)
- Transverse frames and longitudinal girders system
- Vinylester resin for the first three layers
- Transverse frames and longitudinal girders system
- CPP Gelcoat for the hull, deck, superstructure and non-skid surfaces
- FRP radar arch with s/s radar support
- FRP staircase from the cockpit to flybridge
- Built-in settee at cockpit and flybridge
- Built-in settee at the foredeck
- Integral fully protected keel & rudder shoe
- Recessed bow thruster tunnel
- Integral FRP stern thruster casing
Core Materials:
- Cabin side (vertical surfaces): Divinycell of varying degrees of thickness
- Cabin top and deck (horizontal surfaces): Baltic or equivalent vertical end-grain balsa,1″ thick
Deck/hull joint:
- Between deck and hull flange: 3M 5200
- Inside of joint: Three (3) layers M. & W.R. in all accessible locations
- Mechanical fastening: 3/8″ thru-bolts on 6″ centres
Longitudinal Stringer:
- Hull: Full length of each port and starboard
- Hull: Transverse Frame System
Watertight bulkheads:
- Watertight bulkheads per the construction drawing will include, but not be limited to, the following areas: between crew quarters and E/R, E/R and lower guest cabins, aft the bulkhead of Fwd. The guest cabin and chain locker/collision bulkhead are included.
MACHINERY DETAILS
Main Engine:
- Twin Engine Cummins QSL9 405 BHP @ 2100 RPM. Wet exhaust & 24VDC starting
- Gear Box: ZF 360, 2.917:1 reduction
- Alternators: 24VDC 80AMP
- Walker “Air Sep” crankcase ventilation
- Two (2) Vision 6FM200D-X batteries connected in series for 24VDC 200AMP start
- Engine beds are to have a 1/2” stainless steel cap on top of the bed and a 1/4″ plate on the sides. The plates are to be highly polished stainless steel.
- Each engine is mounted on (4) resilient mounts
- FRP drip pan under engine
Engine Controls and Panels:
- Two (2) stations: pilothouse, flybridge. Controls in the aft deck and P&S bridge are optional.
- Engine instrument panels with alarms that will monitor Tachometer, Engine oil pressure,
- Engine water temp, System voltage, Gear oil pressure and fuel burn for each main engine.
Propellers:
- NiBrAl alloy 4-blade counter-rotating propellers. Propellers to be built to I.S.O. class 1
Propeller Shafts:
- Aqualloy 22 or equivalent, 3″ diameter
- Taper details: Standard SAE
- Line cutters on each main engine shaft
Shaft tubes
- Material: Amartech FRP
- Bearings: rubber cutlass type
- Stuffing Box: bronze
Fuel Filter(s):
- One (1) Racor 75-900MAX duplex with 10-micron filter elements.
- One (1) Racor 75-500MA filter is included in addition to a secondary generator-mounted filter for the generator engine. A second filter is optional for the optional generator.
Engine room floor :
- All engine room floors and structural members are to be FRP with white gel-coated surfaces
