Pacific Seacraft Dana 24 Specifications - Standard Features Construction - Hand laminated hull and deck with molded-in gelcoat color. First laminate uses vinylester resin for superior blister resistance. - Deck has molded-in nonskid pattern. - Deck to hull connection: mating hull and deck flanges bedded in polyurethane adhesive and fastened with stainless steel thru-bolts. - Ballast is 3,200 pound (1.45 mt.) solid lead casting. - Interior: structural fiberglass, plywood and gel coat interior unit bonded into hull with fiberglass mat and woven roving. - Stainless steel chainplates and backup plates caulked both sides and thru-bolted to hull. - Solid teak rub strake. Four 7" x 12" and four 4" x 7" opening ports with screens. Two 8" stern mooring cleats with chocks. Two 10" bow mooring cleats with hawse pipes. Two 8" open spring cleats amidships. - All cleats, winches, turning blocks, pulpits and stanchions are installed with backing plates and caulked both sides. - BOMAR forward hatch. - Laminated vertical grain fir bowsprit saturated with penetrating epoxy, primed and painted, teak platform and bronze eye band. - Stainless steel double rail bow and stern pulpits with 27" high stanchions, and double lifelines. - Stainless steel swim ladder with teak treads. - Stainless steel bow roller assembly with two anchor rollers. - Outboard genoa track and cars. - Bow chain locker with anchor deck pipe. - Stern chain locker, anchor roller and deck pipe. - Deep bulwarks w- heavy teak caprail & hand fitted butterfly joints. - Four teak loop handrails. - Fiberglass sliding hatch and fiberglass seahood. - Propane storage tank locker with hatch in cockpit. Stainless steel tabernacle style mast step.. Hand rubbed oiled teak interior. - 6' headroom with teak and holly sole throughout cabin area. - All hatches and hatch openings in sole banded in solid teak. - White matte finish below counter height, teak cabinetry above. - Zippered vinyl headliner for access to deck hardware & wiring. Forward - 6' 8" long and 81" wide double "V" berth with shelves on both sides & storage below. Two teak drawers under V-berth. Main Salon - 6' 6" long settee berths, port and starboard with storage bins. - Teak storage shelf with removable fiddle, both sides. - Slide out dining table stows under V-berth. - Enclosed head w-teak shower seat, storage lockers & separate wet hanging locker. Shower has teak grate & sump pump. - Spacious hanging locker to starboard. Galley - Gimbaled stainless steel, two burner propane stove w- oven. - Stainless steel safety bar-towel rack. - Large ice box w- poured foam insulation and w- hand pump out to sink. - Polished stainless steel double sink. - Food and dish storage lockers and drawers. Plumbing - 40 gallon (151 Itr.) water tank. - Bronze thru-hull fittings with UL approved bronze seacocks below waterline and bronze ball valves above. - Marine head with holding tank and overboard pump out. - All thru-hull hose connections are double clamped. Engine - YANMAR 2GM20F, 2 cylinder, 18 hp diesel - Two blade bronze propeller. - 18 gallon (68 Itr.) fuel tank, easily accessible with gauge and inspection port. - Mechanical fuel pump. Electric back-up fuel pump. - RACOR fuel filter - water separator. Seawater strainer. - Engine hour meter. - Water lift muffler system. - Deluxe control panel with tachometer. - Fresh water cooling. - Copper tinned DC wiring throughout. - 2 marine batteries (approx. 66 amps each). - Four position battery switch. - All required navigation lights. - Dome lights and reading lights. Cockpit - Two 1-1-2" drains with seacocks for fast self-bailing. - Deep cockpit coamings with comfort contoured seat backs, 6' 3" cockpit seats and integral winch islands. - Engine access hatch in cockpit sole has neoprene gasket seal and four knurled bronze retainers. - Cockpit seat lockers. - 25 GPM bilge pump mounted thru cockpit seat riser. Hot & cold pressure fresh water system with shower in head (requires 110 volt AC shore power system).Electrical - 110 volt AC shore power system.